Choosing the right material for a rounded roof

By Chicago Metal Supply. 

Learn why radius flashing is the best option when it comes to roofing rounded projects.  

In roofing, flashing is used to help waterproof the system by bridging joints and transition areas. As an integral part of the roof’s effectiveness and durability, this is typically made from materials such as aluminum or galvanized steel. In addition to the functional necessity of flashing, it also adds an aesthetic boost to projects. There are many different types of flashing, but if you are working with round roofs, radius flashing is the best option. The Chicago Metal Supply has a variety of metal radius flashing options that offer many different benefits for your next project.  

The advantages of metal radius flashing 

Radius flashing is available in a variety of different materials. The question is: what exactly sets metal radius flashing apart? Quite a few things, in fact, which we will discuss below: 

Few maintenance needs 

All flashing materials require some form of maintenance. Note, though, that when it comes to overall maintenance levels, metal flashing isn’t anywhere near as intensive as materials like stone or cement. Generally speaking, metal flashing only requires a basic cleaning every so often. It doesn’t need to be patched up, and it rarely needs to be replaced. It’s a true set-it-and-forget-it type of material. 

Terrific durability 

Metal radius flashing is some of the most durable in existence. On average, it lasts over 100 years, maintaining both its functionality and its aesthetic. Metal radius flashing thrives not only through inclement weather but through physical wear and tear as well. 

If you choose to invest in metal flashing now, you’ll most likely never have to buy flashing again. In fact, because of metal flashing’s low-maintenance needs, you might not even have to worry about it ever again. 

Light in weight 

The weight of your flashing can have an effect on your roof’s structural components. Generally speaking, the lighter the weight of the flashing, the better off your roof’s structural components will be. Fortunately, metal radius flashing is exceedingly lightweight. As such, it will have little to no impact on your roof’s long-term health. 

Sits flush against rounded roofs 

Just as you shouldn’t try to fit a square peg into a round hole, you shouldn’t try to attach flat flashing to a rounded roof. This would not only leave the roof with a lack of protection, but it would also significantly reduce its overall aesthetic. This is where radius flashing comes in. Radius flashing sits flush against rounded roofs, ensuring that they’re fully covered and as aesthetically pleasing as possible. 

Leak-proof 

The whole point of flashing is to prevent water from seeping down into specific portions of a roof. As such, it needs to be leak-proof. Metal radius flashing is entirely leak-proof, and it does a terrific job of repelling water at all times. That, combined with its superior durability, makes it arguably the best flashing material in existence. 

A number of metals to pick from 

We manufacture radius flashing in a number of different metals. These metals include (but aren’t limited to) aluminum, steel, copper and zinc. For more information about our available metals, give us a call today! 

Custom made to accommodate roofs of all kinds 

Regardless of the slope and contours of your roof, we can provide you with radius flashing that is perfect for your home. All of our flashing is custom made and designed to fit your roof’s exact specifications. 

Original article source: Chicago Metal Supply