English
English
Español
Français

UP TO THE MINUTE

By Ken Krawcheck Jr., Check International. The next groundbreaking advancement ...
Read More
McElroy Metals - Sidebar Ad - Oct 2024
Western Colloid - Sidebar Ad - Need a Metal Roof Solution?
Cougar Paws - Steel Walker II- Sidebar Ad on MCS
Sherwin-Williams & Grosso - MetalVue Sidebar - Make More with Metal
NFBA - Sidebar Ad - Accredited Builder
Contractor Outlook - Sponsored by SRS
MetalCoffeeShop
English
English
Español
Français

Practice Ladder Safety All Year Long

ali - national ladder safety month - pr - 2023 - march
April 12, 2023 at 2:00 p.m.

Ladder Safety Month is over, but safe ladder usage is not. 

The American Ladder Institute (ALI) spent last month marking National Ladder Safety Month, spreading the word about safe ladder practices, training opportunities, and more. Because safety never takes a break, now is the time to take the lessons learned in March and carry them forward all year long. By continuing to follow ladder safety practices every day, we can reduce the number of home and workplace ladder injuries.

Here’s are some safety tips to keep in mind:

Choosing your ladder

Before you ever climb, select the appropriate ladder for the job based on style, material of construction, material weight, size and duty rating. First, you have to know whether or not the work can be accessed with a self-supporting stepladder, or a leanable, non-self-supporting, single or extension ladder. To be able to safely reach the work, size must be considered. If light weight is most important, then aluminum might be best. However, if you will be working around electricity, make sure to choose a non-conductive material like fiberglass. Select a ladder with the duty rating to hold your own weight plus any work materials going up with you.

Safety before the first step (inspection and set up)

You’ve chosen your ladder. Now comes the ladder inspection and gaining a thorough understanding of your surroundings. First of all, even a new ladder can potentially be damaged or otherwise compromised. So, the user must visually inspect it to see if it’s in good condition before they use it. If you’ve picked the right ladder for the job, then don’t misuse it by standing higher than you should or by overreaching. Next, take note of the general area you’re in. For example, is there potential for a forklift to come around the corner, or an unblocked door to swing open and knock you over? Is the ladder set up correctly with all feet on a firm, level surface?

Safety while climbing

Maybe you’ve gone up that ladder 100 times. The 101st time is no time to get lax when it comes to personal safety. Always pay attention to what you are doing when climbing and using your ladder. Some tips are just common sense. Face the ladder and have a firm grip. Don’t have hands distracted with other materials. Keep hands free by using a tool belt or some other means, such as a material lift, tag line, or rope, to raise equipment to the work area. Remember to maintain three points of contact as you climb: two hands and one foot or two feet and one hand on the ladder. And don’t do unnecessary reaching. A good rule of thumb: keep your belt buckle between the rails.

Safety at the top

You’re finally at the uppermost point of your ladder. This is no time for slacking off. Contact with the ladder is important not only while climbing, but also while working. To that end, the top step and the top cap of a stepladder and the top three rungs of a single or extension ladder are not suitable standing surfaces. The few upper feet of the ladder are there for body support, so you don’t have to balance on just your two feet. If you are transitioning from the ladder onto another surface, your ladder must be secured from movement.

According to the U.S. Bureau of Labor Statistics, ladder deaths accounted for 161 on-the-job fatalities in 2020, the most recent year for which statistics are available. That same year, there were 22,710 ladder-related workplace injuries, an injury stat that has remained relatively constant over the previous several years.

ALI’s Ladder Safety Training site, https://www.laddersafetytraining.org/, makes safety training easy, with an organized curriculum, video and resource library, and free registration.

About the American Ladder Institute

Founded in 1947, the American Ladder Institute (ALI) is a not-for-profit trade association dedicated to promoting safe ladder use through ladder safety resources, safety training and the development of ANSI ladder safety standards. ALI also represents the common business interests of its members who are comprised of the leading ladder and ladder component manufacturers in the United States, Mexico and Canada. National Ladder Safety Month, observed each March and spearheaded by ALI, is the only program dedicated exclusively to promoting ladder safety, at home and work. https://www.americanladderinstitute.org/.



Recommended For You


Comments

There are currently no comments here.

Leave a Reply

Commenting is only accessible to RCS users.

Have an account? Login to leave a comment!


Sign In
SRS - Banner Ad - Spanish Lunch & Learn Series
English
English
Español
Français

UP TO THE MINUTE

By Ken Krawcheck Jr., Check International. The next groundbreaking advancement ...
Read More
McElroy Metals - Sidebar Ad - Oct 2024
Metal Central - Sidebar Ad - Right When You Need It
Western Colloid - Sidebar Ad - Need a Metal Roof Solution?
Malco Tools - Sidebar Ad - Metal Benders
Contractor Outlook - Sponsored by SRS
CCS-OpenForBusiness-Sidebar