UP TO THE MINUTE

Facility Builders & Erectors, Inc. achieves AC478 Accreditation

The FB&E is the only metal building assembler based in ...

The smart roof revolution

Why more businesses are skipping tear-offs and choosing to build ...

MetalCoffeeShop.com > Roofing Galleries > Metal Roofing Photo Contest

Metal Roofing Photo Contest

Sponsored by:

Bruce Hicks from Distinctive Metal Roofing of Avon, Ohio writes, "Edco Enhanced Slate, Statuary Bronze - Beinhauer Funeral Home in McMurray, PA.”

Isaac King from Duracraft Roofing of Paradise, PA writes, "Standing Seam Metal Roof in Peach Bottom, Pa."

Zachary Johnson from Jenkins Roofing Tampa of Plant City, Florida writes, "Residential Copper Metal Re-Roof.”

Debora Letelier from Kokua Roofing of Kailua-Kona, Hawaii writes, "This residence is inside a private club located on Kauai's south shore."

Jonathan Loftus from Beacon Building Supply of Allentown, Pennsylvania writes, "custom home with ATAS International dutch seam."

Jonathan Loftus from Beacon Building Supply of Allentown, Pennsylvania writes, "custom home with ATAS opaline."

Max Woodward from Coated Metals Group of New Brighton, New Mexico writes, "Project Profile: Modern Mountain Home Tucked into the mountainous landscape of Park City, Utah, this breathtaking residence required a roofing system that could stand up to the region’s harsh climate while complementing the home’s sleek architectural design. Viotell Metal Concepts turned to CMG’s Dark Bronze PVDF standing seam metal, a choice that ensures both performance and aesthetic appeal."

Joel Kenty from Green Knight Metal Roofing of Austin, Texas writes, "Unified Steel Cottage Shingle - Timberwood."

Joel Kenty from Green Knight Metal Roofing of Austin, Texas writes, "Geodesic Dome - KasselWood Steel Shingles in Teak Powder Coat color."

Travis Sliger from 4Ever Metal Roofing, LLC of Fort Wayne, Indiana writes, "Cedar Creek Shake Metal Shingle Installation in Bowling Green Ohio. This project was over 200 squares. The homeowner was seeking a permanent solution but did not like the look of traditional metal roofing materials.”

Mike Sozio from Four Peaks Roofing, LLC of Cape Coral, Florida writes, "Residential roof replacement by Four Peaks Roofing in Ft. Myers, Florida. Westlake - Unified Steel - Stone Coated Steel - Barrel Vault - Timberwood."

Chuck Nolden from DoneRite Home Maintenance of Reedsburg, WI writes, "Decra Stone Coated Steel Roofing, Midnight Eclipse in color installed on a new construction."

Cesar Torres from C & C Construction Services Inc of Hermiston, Oregon writes, "Project Title: Cedar Shake Roof to Sleek & Strong Metal – Umatilla River Transformation Project Description: This home, nestled beside the scenic Umatilla River, underwent a complete roof replacement, transitioning from a weathered cedar shake roof to a sleek and durable metal solution. We installed concealed fastener Cliploc panels by NW Steel from Milton-Freewater, Oregon. Featuring a 24 ga 14-inch width with a 1 ¾-inch rib in a striking Matte Black PVDF finish. Beyond aesthetics, this upgrade ensures superior weather resistance, longevity, and minimal maintenance, providing the homeowners with peace of mind for decades to come. The clean lines of the new roof complement the natural surroundings, blending modern durability with timeless beauty. With its high-performance metal roofing, this home is now ready to withstand the elements while maintaining a bold, refined look. Proudly installed by C & C Roofing – Bringing roofing excellence to the Pacific Northwest for over 25 years."

Gracy Dubon from Maspeth Roofing & Sidding of Maspeth, New York writes, "Standing Seam Roof in the South Hamptons"

Jason Gibson from Storm Guard of South West Austin of Austin, Texas writes, "We installed this Matte Black standing seam system on a homeowner' new home in Austin, Texas."

Kris Luttrell from Wortham Brothers of McKinney, Texas writes, "This is a Tilcore Metal Roof ( Black Granite)."

Kyle Nurminen from Campany Roof Maintenance of West Palm Beach, Florida writes, "Hand-crafted, custom cut, low slope, copper tile roof system over ocean front pergola in West Palm Beach, Florida by The Custom Metal Experts at Campany Roof Maintenance."

Steve Festa from Blues Brother Roofing in Boca Raton, Florida writes, "This home was in Delray Beach Florida and it is a concealed screw system with many angles that brings out the character of the home."

Steve Festa from Blues Brother Roofing in Boca Raton, Florida writes "This was a beautiful home in Southwest Ranches Florida that was built to showcase a metal roof.”

Meagan Thomson from Boyce’s Roofing & Repair of Oceanside, California writes, "This is a Nu-Ray Snap-Lock standing seam roof we did in Encinitas, CA. This project was incredibly complex from start to finish, and we are very proud of the result!"

Tony Iozzia from Canadian Roof Specialist of Vaughan, Ontario writes, "One of my largest projects with scenery that only enhanced the beauty of the roof.”

Stefan Boyer from Metal Roofing Headquarters of Irondale, Alabama, shared this photo.

Tony Iozzia from Canadian Roof Specialist of Vaughan, Ontario writes, "Beautifully surrounded by nature Soteria Metal Roof.”

Cory Franks from Texas Brand Roofing of Crowley, Texas writes, "Country Manor Shake by Isaiah Industries was installed after removal of concrete tile that failed. 24/12 pitch on half of the roof. Hand made pieces in 22 different sizes for the turret.”

Tony Iozzia from Canadian Roof Specialist of Vaughan, Ontario writes, "Turning every roof to metal with this beautiful display.”

Johnny Alexander from Dobson Contractors Inc of Dallas, Texas writes, "Massive 14,000 sq. ft. of expertly cut and seamed snap lock roof system. Coils by McElroy Metals, color - Matte Black, custom roll formed onsite to fit perfectly. This beautiful roof really was the cherry on top for this modern north Dallas Mansion."

Tony Iozzia from Canadian Roof Specialist of Vaughan, Ontario writes, "Customer loves the tile profile but had some low sloped roof. No problem!”

Travis Sliger from 4Ever Metal Roofing of Fort Wayne, Indiana writes, "We installed this VicWest True Nature Cedar Creek Shake, in a shadow deep gray for for the Leffler Family. The home is located in Bowling Green Ohio. Such a fun install. Will have video content on this project finalized soon."

Bill Hippard from Mid America Metal Roofing of High Ridge, Missouri writes, "St. Norbert's Church in Hardin, IL. Was originally asphalt shingles and weathered copper trim. Replaced by Kasselwood Steel Shingles in Slate Rock Gray color, and copper penny painted Kynar coated trim.”

Stefan Boyer from Metal Roofing HeadQuarters of Irondale, Alabama writes, "This is a 200 sq Arrowline Enhanced Slate bt EDCO Products in T-tone Blend. The low slope area is a 24ga PVDF coated Gulflok Standing Seam by Gulf Coast Supply in Medium Bronze.

Steve Clisset from Clisset LLC of Hotchkiss, Colorado writes, "Our custom Dragon Armor(r) metal shingles are designed, fabricated and installed in house from start to finish and can be fit to any shaped surface. This composite shows multiple views of a bio-dynamic designed house that is 3 ellipses joined at their ends. Not only is it a roof product but the 18" fascia is clad as well, fits it all precisely and beautifully."

Wayne Anderson from Crocker Architectural Sheet Metal Co. Inc. of North Oxford, MA writes, "pictures from a private residence in Boston Mass."

Joel Kenty from Green Knight Metal Roofing of Austin, TX writes, "Double Lock Standing Seam with Curved Panels"

Rex Simpson from Gallop Roofing & Remodeling, Inc. of Wanchese, North Carolina writes, "Standing Seam Metal Roof on Roanoke Island NC"

Gabrielle Devove from Saint Vincent Master Roofers of Fort Lauderdale, FL writes, "Curved Metal roof and Custom Final"

Mayra Luna from 1st Choice Roofers LLC of Binghampton, New York writes, "Customer wanted a metal roof. Second floor was way too hot so we installed 1/2 inch iso board between each furing strip. We also cut his ridge to help the house with ventilation. Customer did update us months later about how much cooler their second floor was."

Luis Hernandez from 50 North Roofing Company of Wallace, NC writes, "This a .032 Aluminum, Bone white, Double lock metal roofing."

Heather Sanders from Allcon of Greenville, Inc. in Taylors, South Carolina writes, "Lake Keowee, SC - Preweathered Galvalume by McElroy Metal, Installed by Allcon of Greenville."

Bill Chambers from Chambers Roofing Co. of Middlebury Center, PA writes, "1 1/2” snap lok on several buildings."

Hanna Brown from Cornett Roofing Systems of Franklin, IN writes, "24 gauge Powder Coated HD Metal Tile and Solar Installation."

Jade Shadd of White Stone 1998 Inc from Forest, Ontario Canada writes, "Diamond Steel is not only for your roof, we can also install it as siding!"

Jen Forget from APEX Roofing in Georgetown, Texas writes, "A realtor of ours who is selling the home!”

Brenna Shepherd from Rojas Roofing in Noblesville, Indiana writes, "Update in progress! This corrugated metal layover was installed on one of the renovated buildings at the Indiana Central State Mansion. The property was built in 1848 as a hospital, but was converted into a psychiatric hospital by 1905. Closed in 1994, the buildings were mostly abandoned until the mid-2000s when businesses started to move in. Rojas Roofing is proud to be a part of the renovation of this historic landmark."

Susan Abbott from Ohio Metal Roofing of Marion, Ohio writes, "24 gauge Drexel Metals Standing Seam roof in Classic Bronze and Brilliance Red with 26 gauge Metal Exteriors Board & Batten Siding."

Dylan DeLater from Pro Roofing and Siding of Marietta, Georgia writes, "Beautiful Standing Seam"

Phillip Miller from Metal Master Roofing and Construction of Burleson, Texas writes, "We removed a concrete tile roof and installed a Boral stone coated steel barrel vault roof."

Debora Letelier from Kokua Roofing of Kailua-Kona, Hawaii writes, "Home located in Holualoa, HI. Standing seam roof system."

Tina Cain from Roof Check Inc of Longmont, Colorado writes, "Residential Re-Roof CMG Burgundy here in Evergreen Colorado, this job was massive. Tear off of old asphalt shingles, replace with standing seam."

Chuck Nolden of DoneRite Home Maintenance of Reedsburg, WI writes, "Decra Shingle XD”

DECRA Metal Roofing Contractor: Heritage Roofing Inc

Thanks to Gina Cali on behalf of Decra Metal Roofing writes, "Profile: Shingle XD DECRA Color: Old Hickory Location: Leamington, Ontario; DECRA Metal Roofing Contractor: Heritage Roofing Inc."

Alexander Prothmann from Architectural Sheet Metal 101 of Ontario, Canada writes "This project is a one of a kind house in North York, Toronto, Ontario, CA...0.8mm thick zinc tile custom made to fit the double convexing, twisting nature of this roof…a lot of fun and a lot of lessons learned"

Frank McKinney from National HomeCraft, LLC of Ocala, Florida writes, "Job Location: Orlando Florida, Removed Existing Concrete Tile Roofing, Renailed Wood Decking to FBC, Installed self adhered secondary water barrier directly to wood deck, installed 1/2” wood perimeter nailer on all eaves,-rakes - each side of valleys and ridges, dropped in 1/2” R-Matt insulation board, installed FMRP 24 gauge metal barrel tile roof on entire residence, fabricated on site with Van Mark commercial portal brake tapered standing seam roof system with cover kleats on front centrical section of home…."

Mike & Sherri Peterson from Innovative Roofing Solutions of Burleson, Texas writes, "Another Beautiful Country Manor Shake"

Bill S. from Sunvek of Phoenix, AZ writes, "Wrapping up a Copper roof install before the patina developed"

Ivan Navarro from Kudu Roofing LLC of Littleton, CO writes, A beautiful Standing Seam reroof on beautiful Log Cabin in the mountains.

Sent in by Heather West for RHEINZINK America, Inc. of Woburn, MA writes, “Photo by Bruce Cole Photography, courtesy of RHEINZINK –– Set on a 90-acre woodland overlooking the Tennessee River, McDonough House is the first new structure in more than 30 years built at Loghaven Artist Residency in Knoxville, Tennessee. Reflecting the evolving landscape and the original cabins’ historical style, the McDonough House features the dynamic, natural beauty and lasting performance of RHEINZINK-prePATINA® graphite-grey zinc material."

Bruce Hollingsworth from USA Roofing & Construction of Lancaster, TX writes, "16-1/2" snap lock zinc gray 26 ga metal roof."

Mike Powell from The Roofing and Construction Company of Hartford, South Dakota writes, "This is composite wall panel system on the Watertown, SD airport terminal."

Denice Abbott from Davco Roofing & Sheet Metal of Charlotte, NC writes, "The Davco Roofing & Sheet Metal artisans had the opportunity to create a domed roof for a home being built in the area. It took skill and patience to form and place each individual piece, but the outcome was fantastic and the client was thrilled. We are so proud of this project!”

Tammy Hall from CFS Roofing of Fort Myers, Florida writes, "This year we completed Cypress Cove in Fort Myers, FL. We fabricated and installed approximately 600,000 sqft of roofing metal."

Heather West from RHEINZINK America of Woburn, MA writes, "Kyle Jeffers Photography, courtesy of RHEINZINK - A hemispheric dome, clad in more than 1,500 RHEINZINK-prePATINA® graphite-grey flat-lock tiles, prominently crowns the new planetarium's roof at Sacramento Municipal Utility District (SMUD) Museum of Science and Curiosity (MoSaC)."

Kaitlin Cox from Bliss Roofing, Inc. of Clackamas, OR writes, "This is a Main House & Boat House on Lake Oswego in Portland, OR installed with 16" Easy Lock Dark Bronze Taylor Metal panels."

Harold Martin from West Coast Florida Enterprises, Inc. of Ft. Myers, Florida writes, "We installed this Pac-Clad metal roof system on the Quail Creek Country Club and Sports Building Complex in Naples, Florida."

Steve Clisset from Clisset LLC in Hotchkiss, CO. writes, "26 Gauge Copper Penny install of Dragon Armor(r) on a biodynamic residence in Paonia CO. This focus on the detail shows just how beautiful and precise this installation is but doesn't do true justice to the what this actual structure looks like. It is hard to get photos that include all of this sprawling structure without impacting the ability to see the exquisite details. It is 3 elliptical sections that join in a line at their tips and has the clerestory seen here in the central section as well as 2 skylights offset towards the ends of the end sections. Total sqs. is at about 52 all in this beautiful spiral configuration with continuous 18" fascia detail at the perimeter.”

Beverly Coral from Esary Roofing and Siding Co. Inc. of Burlington, WA writes, "24-gauge standing seam on local community center"

Nick Dillen from Formula Roofing and Remodeling in Denver, CO writes, "Berridge Tee-panel standing seam on unique custom remodel in Boulder CO"

Bruce Hollingsworth from USA Roofing & Construction of Lancaster, TX writes, "16-1/2" snap lock zinc gray 26 ga metal roof"

Pat Frank from Weatherproof of Centereach, NY writes, "I got a call from a roofing contractor asking me to put a copper standing seam roof on a doghouse. So I drive the 50 miles to the house with 3 sheets of metal (1) helper and a brake."

Jen Forget from APEX Roofing in Georgetown, TX. writes, "Standing seam metal roof we cut on the job site!"

Jack Bauer from Architectural Metal Works in Tualatin, OR. writes, "Our 2018 project at Diesel Cast West in Portland, OR. Featuring our 24g mechanically seamed pre-painted kynar 500 matte black metal roof manufactured in-house."

Joel Thomas from RoofTec in Arvada, CO. writes "This property need an exterior update and got one in a BIG way. This was a newly purchased home in the Rocky Mountain of Alma ,CO. The next door neighbor spotting us re-engineering a porch roof and it's structure after being damaged by Ice Melt falling from an upper roof slope. He informed RoofTec he was having trouble gettting quality contractors to travel to the High Country to work on his property and the ones he had show up did subpar work. Knowing the Homeowner was is in a tight spot with winter hitting a little sooner in the Mountains, RoofTec stepped in immediately. The RoofTec Team helped finalize design plans with the customer before acting a General Contractor to preform this work. The Team handled the permitting, demo on all trades; windows, siding, and roof. Knowing the customer already had several bad experiences with other contractors. The RoofTec Team knew the importances of installing these materials with purpose, paying attention to detail; running each siding panel to align perfectly with the seams of the roof panels to match. Giving this property modern unique clean look our customers was looking for. Helping turn a bad situations into a Great Experience is the RoofTec Difference."

Chad Hale of HalesRoofing LLC in Sedona, AZ. writes, "Metal Sales 2" Mechanically seamed - 24 gauge - Sedona Arizona"

Brandy Tilley from Dolan Roofing and Construction of San Antonio, TX writes, "King of Kings Lutheran Church Steeple/Bell Tower standing seam replacement in San Antonio, TX. Scaffolding was erected around the tower to access the work area. Our team replaced the standing seam panels and installed new metal fascia wrap."

Phillip Miller from Metal Master Roofing of Burleson, TX writes, "Preweathered galvalume snap lock."

John Rowland from A-1 All American Roofing Co of San Diego, CA. writes, "Removed old 2-piece clay tiles and installing Metal Sales Snap Lock in Weathered Copper."

Jesse Walters from JW Roofing of Dayton, Ohio writes, "We went from an asphalt roof to a Black Premium Rib Metal Roof with matching Black 6” Gutters & Downspouts. The transformation on this one looks amazing!"

Gabi Criado from The Durable Slate Company of Columbus, Ohio writes, "The center spire at St. Andrew's Catholic Church in Roanoke, VA was restored with 20 oz copper. For this, the spire as a whole was cut loose of the existing crane to the ground. Each piece was individually custom fabricated and hand soldered in place to ensure a water tight fit. The craftsmen carefully removed each piece of copper and cataloged them in relation to where they were removed from on the spire and roof. Each new piece was then replicated in the exact size and shape as the original by hand. As a result, the restored spire has the same quality and workmanship as the original that was installed back in the early 1900s.”

Gabi Criado from The Durable Slate Company of Columbus, Ohio writes, "Steeple Square, the former St. Mary’s Church located in Dubuque, IA, required more than 15,000 pounds of copper to create hundreds of flat-lock panels. Chicago Metal Supply used an additional 10,000 pounds of copper to fabricate dozens of decorative pieces, which The Durable Slate Company installed.”

Matthew Lamz from Dimensional Roofing & Diagnostics of Austin, TX. writes, "1.5” tall Snap Lock, 24 gauge in McElroy Galvalume. Austin TX"

Cesar Torres from C&C Construction Services Inc / C&C Roofing in Hermiston, OR writes, "Commercial Roofing Project product installed Taylor Metals MS200 mechanically seamed, siding and soffits.”

Cesar Torres from C&C Construction Services Inc / C&C Roofing in Hermiston, OR writes, "This project was one of the most complex metal roof project during the winter in January due to heavy snow loads; with multiple dormers, valleys and hips. We had every rib match from the eave to the ridge parallel from one dormer to the next. Product Installed: 22g. Nu-Ray Metal Pencil Rib profile name: NRM-2000 size : 1 1/2" Rib 16" panel color; Old Town Gray kynar SRI-44 size: 7,000 sq ft home.”

Craig Rainey from Supreme Roofing in Dallas, TX. writes, "New Cooper standing seam roof system with copper wall panels that hide an internal downspout."

Spiro Koura from The Roofing Company of Greenville, SC writes, "Copper hand crimped standing seam.”

Steve Clisset of Dragon Armor Custom Metal Shingles in Colorado writes "Just wanted to share our latest project, a yurt.”

Paul Lochan from Roof Mechanics & Company LTD from Barrackpore, Trinidad writes, "This aesthetic roof has been uniquely designed, manufactured & installed with Standing Seam S-2000 profile, creating a stunning work of art for Modern Architectural Home."

Dan Schilperoort from Columbia Plateau Inc. in Union Gap, WA writes, "Custom 20' trapezoid panels 2" mech hem, internal gutter water feature, offset hips utilizing standing seam rather than hip cap, layout challenge to have ribs line up eventually and nearly full panels on gables."

Kaitlin Cox of Bliss Roofing, Inc in Clackamas, OR writes, "This metal roof is a 2018 Street of Dreams in Hillsboro, OR. Installed Charcoal Grey Taylor Metal 12" 26-gauge Easy Lock metal"

ATAS International, Inc. and Howard & Sons, Inc.

Lee Ann Slattery from ATAS International, Inc. in Allentown, PA writes, "This private residence in Temecula, California has ATAS International's Dutch Seam panels in Dove Grey 24-gauge steel on it. The metal roofing panels were installed by Howard & Sons, Inc., with two locations in southern California. The panels have a smooth finish and are 15" in width with a seam height of 1-1/2". The beautiful standing seam panels will protect this luxury home for many years, and the light grey color with the cool paint pigments will help to reflect the sun's rays in California, with a solar reflectance index (SRI) of 55. Should the owners choose to add rooftop solar panels in the future, this solar ready roofing will make it easy to do so, with special clamps that eliminate roof penetrations."

Ron Lloyd from Kokua Roofing in Kailua-Kona Hawaii writes, "Sacred Heart Catholic Church was built in 1925. It is located on the north of the Island of Hawai'i, a very windy and rainy area. This 30 year old roof needed to be replaced. Pitch is about 14/12 therefore safety was important. It was a risky yet fulfilling challenge for the guys who did awesome and the end result is now for everyone to enjoy."

Matthew Leonard of Architectural Sheet Metal Inc. in Orlando, FL writes, "from 4/12 to 11/12 pitch with 22ga Berridge Cee-Lock. This Amenity building for the neighborhood will last a life time"