By Malco Products.
The trend towards choosing metal as a roofing material has significantly accelerated, with predictions pointing towards further growth in its popularity and demand. Opting for metal roofing not only enhances a home's value but also its energy efficiency. A study by Remodeling Magazine reveals that renovations incorporating standing-seam metal roofing see an impressive cost recoupment of nearly 86 percent on average, with this figure soaring to almost 96 percent in the eastern states, attributing to a surge in resale value compared to homes featuring asphalt shingles.
This expanding market highlights the necessity for contractors to have access to superior tools that ensure roofing tasks are completed efficiently and without compromising on quality or installer safety. This is where Malco's commitment comes into play, as the company dedicates itself to devising innovative, industry-specific solutions.
This brings us to an exciting time in the metal roofing sector! We're thrilled to showcase a selection of Malco tools that stand out for their portability, ergonomic design and their capacity to not only facilitate roofers in achieving premium-quality outcomes but also in enhancing job efficiency.
The new Modular Metal Benders by Malco have the ability to form 0°-100° bends on straight or curved panels of any length. Plus, you can use a connector to join multiple models together to create a two-station bending experience!
This handheld tool is portable and was designed to be used on the jobsite, eliminating the need to wait on wholesale roll formers. Malco’s Metal Benders are made with premium components, are easy to use and compact, making a contractor’s job faster and easier.
Malco’s 3-Station Edge Roller (ER3) is made for durability on jobsites. This top-level roller ensures a uniform bend along the entire length of roofing materials. The design makes it easy to adjust and allows for bending on a curve. It is a must-have tool for metal roofers!
Malco’s new Andy™ Aluminum Handled Offset Left Snips just launched! “Andy™” has become synonymous with lightweight snips across the trades and is one of Malco’s best-selling product lines. Malco’s latest offering is the Andy™ Aluminum Handled Offset Left Snips, which is lightweight and durable, and can cut aluminum, copper and sheet metal. The handles fit a variety of hand types, making them ergonomic for all users. Malco’s AV aviation snips, AV6 and AV7, are also offset, highly maneuverable and perfect for metal snipping needs.
Malco’s C-RHEX® for Building Construction Cleanable, Reversible Magnetic Hex Driver are ideal for roofers. With deeper sockets, they’re perfect for installing fasteners with higher head heights, like concrete anchors or pole barn screws. These magnetic hex drivers come in six lengths and were built for flexibility and productivity. Engineered to save roofers time, the driver can quickly change between 1/4 in. and 5/16 in. hex sizes and is designed so metal shavings can be easily cleared. Made with S2 hardened steel, they offer long life and superior durability.
TurboShears (for metal roofing, we recommend TSCM for corrugated metal, TSMD double shear or the TSHD): Designed to save time and improve accuracy, 20 years ago, Malco introduced TurboShears. This line of shears can cut virtually anything, from sheet metal to vinyl to backerboard. These lightweight shears attach to common drill sizes, making them space-saving, easy to handle and convenient for contractors.
Coming in two sizes (24 in. And 18 in.), these Drip Edge Folding tools make quick bends on the drip edge easy. Made from reinforced steel plates that are permanently welded together, they make deep bends while being lightweight and easy to use. They can bend up to 22-gauge material approximately 150 degrees, allowing you to finish the Drip Edge with one of Malco’s seamers.
Malco offers three seamers: Hand Seamers with Cast Zinc Jaws, Hand Seamers with Forged Jaws and Cast Steel Seamer & Tongs. Create precise, quality seams with these versatile and maneuverable tools. No matter what type of seam you need to make, we have you covered.
Malco’s stone coated steel roofing cutter was designed with the end user in mind, with two working table height options. Its sturdy, large table surface allows for greater control when cutting. Plus, the generous handle length reduces the force users need to cut by up to 30 percent (based on internal testing), making work easier for the installer.
With the metal roofing industry expected to keep growing over the years, it’s important to protect roofers’ health and safety, and maximize their time while always keeping quality top-of-mind. Malco has been designing quality tools for more than 70 years and is proud to support and advance the metal roofing industry.
Original article source: Malco
Learn more about Malco Products in their Coffee Shop Directory or visit www.malcoproducts.com.
Comments
Leave a Reply
Have an account? Login to leave a comment!
Sign In