English
English
Español
Français

UP TO THE MINUTE

By Predictive Sales AI., Spectrum. Navigate the digital era with effective social ...
By Jesse Sanchez. AI-powered design transforms how contractors close deals, ...
Read More
IRE - Sidebar - IRE _ 11.21.24
ABC (American Building Components) - Sidebar Ad
Metal Sales - Sidebar Ad
Western Colloid - Sidebar Ad - Need a Metal Roof Solution?
Cougar Paws - Steel Walker II- Sidebar Ad on MCS
Contractor Outlook - Sponsored by SRS
MetalCoffeeShop
English
English
Español
Français

8 Steps to Help You Safely Climb a 45-degree Pitch

RPS 45 Degree Pitch
April 11, 2023 at 6:00 a.m.

By Joe, RPS Metal Roofing & Siding Inc. 

You don’t need to be a professional climber to conquer this angle.  

Steep roofs are no joke. They should be taken seriously because the slightest error could cause an accident. Now, you don’t need to be a professional climber, but safety is reliant on a few requirements: confidence, equipment and experience. Climbing a 45-degree angle could be less challenging if you follow these steps from RPS Metal Roofing & Siding Inc. 

What you need 

If you want to climb a 45-degree roof, there are certain pieces of equipment you need to ascend and descend safely; these include gloves, sturdy shoes, rope, carabiners, a climbing harness and an anchor trolley system. If you don’t have these important items, it can compromise the safety of the climb. Set yourself up for success by visiting a local warehouse and stocking up.  

Step one: fixed gear  

A 45-degree roof is hazardous even in dry conditions, so you need to secure fixed equipment before attempting the climb. Attach your anchors to the roof using a minimum of ¾ inch solid material to secure it. Also, make sure the anchors are rated for their pound value to support your weight as you climb. Avoid climbing if you notice the anchors are loose or unsupported.   

Step two: fall hazards   

Naturally, good footing is an important aspect of the climb. Make sure you are wearing shoes or boots with a suitable sole – a grippy rubber sole or something similar. Remember, you will ascend or descend the roof at a 45-degree angle with your feet around waist height; this makes it dangerous when leaning towards the roof to remove shingles. Always stand on solid material.   

Step three: roof pitch   

A 45-degree roof pitch is steep and not recommended for beginners. If you don’t have much experience climbing sloped roofs gaining experience is the best place to start. Begin with lower gradients like 20- and 30-degree slopes to get the feel for the angle and the type of issues that come up when you are climbing; when you feel more confident, attempt the 45-degree pitch.  

Step four: hands and feet   

When you are working at an angle, the position of your body is important. Not only do you need to stand in the way that prevents slippage and gives you the best chance of avoiding an accident, but the form you use can also support effective climbing. Stand with your feet and hands apart on different parts of the roof. Try to think holistically about the twin movement of hands and feet.  

Step five: moving   

No matter how secure your anchor feels, it’s important to secure your hands and feet on the roof at all times. Throughout the climb, stay conscious of the position and security of your foothold and your handhold; if something feels unsteady, you need to move into a more secure position. If you get halfway up and feel insecure, you need to return to the start or abandon the climb.  

Step six: solid grip  

Make sure your feet don’t slip out from under you as you climb, to do this, you need to compress the shingles under your feet or ensure that you have a solid handhold. When you make moves on the roof, always look for something solid to grip hold of before letting your weight bear on the anchor or the roof. Again, if you can’t find support move back or down or abandon the climb.     

Step seven: the holes   

As you walk on the shingles of the roof, there is a good chance they will come loose, leaving gaps and holes. Of course, this is a safety issue for climbers, especially climbers on the way back down. Holes can cause a foot to disappear through the roof, causing injury to the climber. One solution is to fill in the holes with a board as you climb over the shingles damaging them.  

Step eight: the climbing 

When you have the equipment in place, the right body positioning, and some knowledge and experience of climbing on lower gradients, you should be able to climb confidently on a 45-degree roof. Start with your arms and legs shoulder width apart, but as you climb, draw them in closer to a position that feels comfortable for the gradient. Climb carefully and don’t hurry. 

Original article source: RPS Metal Roofing & Siding Inc.

Learn more about RPS Metal Roofing & Siding in their Coffee Shop Directory or visit www.rpsmetalroofing.com.



Recommended For You


Comments

There are currently no comments here.

Leave a Reply

Commenting is only accessible to RCS users.

Have an account? Login to leave a comment!


Sign In
Westlake - Banner Ad - Hail protection you can rely on (MCS)
English
English
Español
Français

UP TO THE MINUTE

By Predictive Sales AI., Spectrum. Navigate the digital era with effective social ...
By Jesse Sanchez. AI-powered design transforms how contractors close deals, ...
Read More
Sherwin-Williams & Grosso - MetalVue Sidebar - Make More with Metal
Vicwest - Sidebar Ad - Updated Bellara Ad
NFBA - Sidebar Ad - Accredited Builder
Cougar Paws - Steel Walker II- Sidebar Ad on MCS
CCS-OpenForBusiness-Sidebar
Central States - Side bar Ad - 2024